印度认证

BIS

自2012年印度电子与信息技术部（DeitY）发布《电子和信息技术产品（强制性注册要求）法令》至今，已有75类产品被纳入强制性范围。管制产品必须在印度官方授权认可的试验室进行指定的标准测试，并在测试后进行注册，且需在产品本体或外包装盒上标示认证标识后，才可进入印度市场，否则，货物将无法清关。

GTI自2015年开始协助客户申请BIS CRS，目前已成功帮客户取得几千份证书，与印度多家实验室和BIS官员有密切合作关系，可快速顺利地为您拿到R号。

认证流程：

1.    客户下单并寄送样品到GTI印度办事处

2.    GTI广州客服团队协助客户准备认证申请的相关文件

3.    印度实验室测试并出具报告

4.    GTI印度将申请文件以及测试报告上传给BIS审核

5.    BIS审核报告和资料并出具带有R号的证书

Since the release of the Electronic and Information Technology Products (Compulsory Registration Requirements) Act by the Indian Ministry of Electronics and Information Technology (DeitY) in 2012, 75 products have been included in the mandatory scope. Regulated products must be tested in designated laboratories authorized by the Indian government and registered after the test, and the certification mark must be marked on the product body or the outer packaging box before entering the Indian market. Otherwise, the goods will not be able to enter the market.

GTI has been assisting customers to apply for BIS CRS since 2015. It has successfully obtained thousands of certificates for customers and has close cooperation with many Indian laboratories and BIS officials to get the R number quickly and smoothly.

ISI

根据BIS规定，BIS CRS强制清单以外的产品可以申请ISI认证。ISI认证分为强制认证和自愿申请两部分。认证周期一般为自向BIS当局递交申请起的6个月。

截止目前，共有136种产品被列入ISI的强制认证清单，涉及的产品类别如下：

1. 水泥

2. 家用电器产品

3. 食品以及相关产品

4. 石油压力工业炉

5. 气瓶，阀门及调节阀

6. 医疗设备

7. 钢材产品

8. 变压器

9. 电机

10. 电容

11. 化学品和肥料

12. 厨房电器

13. 燃气热水器等

认证流程：

1.    客户提出申请并提供基础认证信息

2.    GTI进行项目评估并提供详细报价和认证方案

3.    客户下单并在GTI广州客服团队指引下准备申请文件

4.    GTI印度或客户的印度代表将申请文件邮寄给BIS审核

5.    BIS审核后出具项目号及BIS审厂官员联系方式

6.    GTI联系BIS审厂官员沟通审厂排期及细节

7.    BIS官员按期审厂

8.    审厂过程中BIS官员进行目击测试或者随机抽样寄到印度实验室进行测试

9.    GTI向BIS递交资料申请证书

10.  BIS审核发证

Products other than the BIS CRS Mandatory List can apply for ISI certification according to BIS regulations. ISI certification is divided into mandatory certification and voluntary application. The certification period is generally six months from the submission of the application to the BIS authorities.

Up to now, a total of 136 products have been listed in the ISI mandatory certification list, and the product categories involved are as follows:

1. Cement

2. Household appliances

3. Food and related products

4. Petroleum pressure industrial furnace

5. Gas cylinders, valves and regulating valves

6. Medical equipment

7. Steel products

8. Transformer

9. Motor

10. Capacitance

11. Chemicals and fertilizers

12. Kitchen appliances

13. Gas water heaters, etc.

Application Process:

1 Application

2. Project evaluation

3. Prepare the application documents

4. Submit the application for certification

5. Review application materials

6. Audit

7. Testing

8. Apply for a certificate

9. Issuing the certificate

WPC

WPC: Wireless Planning and Coordination Wing，是印度管制无线法规的机构，所有无线产品在进入市场之前必须取得WPC的核准。印度无线通讯产品依据产品类型分别由无线规划与协调部（WPC）和通讯工程中心（TEC）两个管制机构分别管控。

WPC覆盖所有带有无线电发射装置的设备。其中包括移动（GSM或WCDMA）手机，无线局域网（WLAN）设备，如Wi-Fi设备、蓝牙设备、Zigbee设备、WiMAX设备、RFID设备、非接触式智能卡阅读器，并结合了一些其它的RF发射器的产品RF。

无线产品在印度无线认证可分为ETA（Equipment Type of Approval）认证和License执照两种模式，其判定依据来源于申请设备所使用的工作频段。对于免费开放的频段例如13.56 MHz、433MHz、2.4GHz、5.725-5.825 GHz等，需要申请ETA认证；如果设备使用其它非免费开放的频段，如GSM、WCDMA手机等，则需要申请执照。

对于ETA认证，印度认可欧洲EN标准和美国FCC标准，WPC通过审核报告的方式签署证书。而对于License执照，则需要满足印度的标准要求。对于ETA申请，产品不需要送到印度当地进行测试，产品具有RF报告即可向WPC提交认可申请。WPC证书的持证者必须是印度当地公司，GTI可提供此当地代理服务。

WPC (Wireless Planning and Coordination Wing) is India's agency that regulates wireless regulations. All wireless products must be approved by WPC before entering the market. India's wireless communication products are controlled separately by the two departments of the Wireless Planning and Coordination Wing (WPC) and the Telecom Engineering Centre (TEC).

WPC covers all devices with radio transmitters. These include mobile (GSM or WCDMA) handsets, wireless local area network (WLAN) devices such as Wi-Fi devices, Bluetooth devices, Zigbee devices, WiMAX devices, RFID devices, contactless smart card readers, and some other RF emissions products.

The wireless certification of wireless products in India can be divided into two modes: ETA (Equipment Type of Approval) authentication and License. The judgment is based on the working frequency band used by the application device. For free open bands such as 13.56 MHz, 433 MHz, 2.4 GHz, 5.725-5.825 GHz, etc., ETA certification is required; if the device uses other non-free open frequency bands, such as GSM, WCDMA mobile phones, etc., you need to apply for a License.

For ETA certification, India recognizes European EN standards and US FCC standards, and WPC signs certificates through reviewing reports. For licenses, you need to meet Indian standards. For ETA applications, the product does not need to be sent to India for testing. Products with RF reports can submit accreditation applications to WPC. The holder of the WPC certificate must be a local Indian company and GTI can provide this local agency service.